Ambient Weather WS-8600-AC AC Adapter Replacement for the WS-8600 Clock

If the sensor(s) have stopped communicating to your console,  it may be as simple as placing the remote(s) (powered up) about 10 feet away from the console, power down and up the console by removing one or more batteries, disconnecting from AC power (if applicable), wait 30 seconds, and put the batteries back in, then wait several minutes to resync.

DO NOT TOUCH ANY BUTTONS and look for the search icon. Wait until the search icon turns off before pressing any buttons.

If you have more than one sensor, make sure they are programmed to transmit on different channels.

If the problem persists, we have a one year warranty. To replace under warranty, please visit: www.AmbientWeather.com/rma.html

The thermometer accuracy is +/- 2 degF and the hygrometer accuracy is +/- 5%.

Note that the indoor temperature sensor is inside the AC adapter connector, so make sure it is not near a potential heat source.

If the indoor console and outdoor sensor are sitting side by side and outside of this range, there is an issue with the thermo-hygrometer.

Make sure you have fresh non-rechargeable batteries in the unit. I prefer Lithium and Alkaline.

We do have a one year warranty. If the problem persists, please visit:

www.AmbientWeather.com/rma.html

For out of warranty sensor replacement, please visit: https://www.ambientweather.com/amtx8340.html

Console : Input 4.5V DC; 1.8m 120V 60Hz wall charger included, Power Consumption: 1.5W, 0.3A power rate

DC barrel connector dimensions:  9.0mm ( L )  x 3.5mm ( OUT D) x 1.35mm ( Inner D)

Product Manual
https://ambientweather.com/mwdownloads/download/link/id/574/

Product Page
https://www.ambientweather.com/amws8600.html