Important Note: If you are running Version 1.0.1, you cannot upgrade.
Instructions:
Download the firmware update file above to your PC or Mac. You cannot download a file to your tablet or mobile phone.
When you first power up the console, or press and hold the MIN/MAX- button for three seconds, the WiFi icon will flash to signify that it has entered wireless access point (WAP) mode, and is ready to connect to the console’s WiFi.
Connect to the console’s WiFi. The console’s network name begins with WeatherHome, followed by a unique code:
Once completed, you will return your device to the normal WiFi settings.
Once connected to the console WiFi, open any web browser, and enter the following IP address into the address bar:
Since the WS-50 can be bundled as a complete weather station, the channel 1 sensor is treated as the outdoor sensor on AmbientWeather.net.
If this is not appropriate for your application, you can switch to channel 2. In addition, you can also change the label to something more descriptive: