Ambient Weather AQIN Pro Smart Indoor Air Quality Monitor with Display
The Ambient Weather AQIN Pro is an advanced indoor air quality monitor that measures PM1, PM2.5, PM4, PM10, CO₂, temperature, and humidity, featuring a built-in display for real-time insight. Designed to work with compatible Ambient Weather stations, AQIN Pro delivers clear, actionable indoor air quality data through the Ambient Weather Network.
The Ambient Weather AQIN Pro indoor air quality monitor can be placed anywhere in your home, classroom, or office to measure PM1, PM2.5, PM4, PM10, CO₂, temperature, and humidity. AQIN Pro features an integrated digital display that provides real-time indoor air quality visibility at a glance.
The AQIN Pro sends data to the Ambient Weather Network (AWN) through a compatible Ambient Weather station, where users can view current and historical air quality data, configure alerts, and access reports via web or mobile dashboards. The AQIN Pro also supports smart home integration with Google Home and Amazon Alexa when connected through AWN.
Particulate matter measurements are captured using advanced optical sensing technology that detects and categorizes airborne particles of varying sizes. PM1, PM2.5, PM4, and PM10 refer to particles with diameters of 1 micron, 2.5 microns, 4 microns, and 10 microns or smaller, respectively. These measurements help provide a clearer understanding of indoor air quality conditions influenced by allergens, smoke, and everyday activities.
The AQIN Pro is powered via USB-C, with a 2 × AA rechargeable lithium battery backup for continued operation during power interruptions.
Notes/Limitations: The AQIN Pro is not a standalone device and requires a compatible Ambient Weather station to transmit data to the Ambient Weather Network.
Compatible Stations:
- WS-1551-IP
- WS-1938
- WS-1965
- WS-2000
- WS-4000
- WS-5000, WS-5050, WS-5000-IP
- ObserverIP2.0, WeatherHub
*Make sure to upgrade your firmware first.
Place the sensor in a well-ventilated, non-moisture condensing area.
The AQIN Pro Smart Indoor Particulate Monitor has a water resistance rating of IPX0 (for indoor use only; this product has no special protection from water).
With PM1, PM2.5, PM4, and PM10 sensors, water droplets reflect the light, and can result in a higher reading. This is characteristic of the inherent sensor design. The condition occurs when: Temperature – Dew point Temperature ≤ 2ş C (3.6 şF). Thus, when the air is nearly saturated, the data is invalid.
The PM25IN and AQINPRO use the same channel on the WS-1965, WS-2000, WS-4000, WS-5000 and OBSERVERIP2.0. Each receiver will only support one PM25IN or one AQINPRO, not both.