• Cover the solar collector to shut of the solar energy source.
• Remove the batteries.
• Let sit until the red LED on the bottom goes out showing you had drained the solar capacitor
• Press the reset button (#10, below) for a full minute with a pointed object, such as a pen tip:

• Reinsert fresh batteries
• Uncover the solar collector.
• LED(#11) should flash once per 16 seconds. If it is not flashing, the sensor array must be replaced.
• Power down and up the console to resync(Remove batteries and AC Adapter then reinsert)
• May take a few minutes for the outside array information to display on the console.

We also have a video which you can watch to walk you through the reset.

HOW TO: Reset Your WS-2902C Array

If the weather station array is not communicating properly with the indoor console AFTER performing ALL of the steps above, then the outdoor sensor array OR individual sensor/sensors will need to be replaced.

To Perform a Network Reset:

Please follow the steps below to perform a Network Reset:

1. Unplug power to modem, router and weather console (unplug AC adapter and/or remove batteries).
2. Plug power back into the cable Modem and let it sync back up with the network.
3. Plug power back into the Router and let it sync up.
4. Plug AC adapter back into the console.
5. Proceed to step 6 if using a WS-2902C, WS-2902B, WS-2902A, WS-2902, WS-2000, WS-2002, WS-5000, WS-8482, WS-0262A, WS-50, WS-8478, WS-8480, WS-1000, WS-1001, WS-1002
6. Wait 5 minutes then click the corresponding link below and follow the setup instructions to connect your console to wifi

I Cannot Connect My WS-2902A, WS-2902B, WS-2902C To WiFi, Android.

I Cannot Connect My WS-2902A, WS-2902B, WS-2902C To WiFi, Apple Or IOS.

How Do I Connect The WS-8482 To WiFi And The Internet?

How Do I Connect The WS-2000/WS-5000 To WiFi And The Internet

How Do I Connect My The WS-50 To WiFi?

WS-0262A: Cannot Connect WS-0262A To WiFi And The Internet With Android Device.

How Do I Access The User Interface Panel, Falcon Series.

I Cannot Connect To My Wireless Router., WS-1000-WiFi, WS-1001-WiFi, WS-1002-WiFi

**NOTE** MAKE SURE YOU ARE USING THE AC POWER ADAPTER THAT CAME WITH YOUR CONSOLE. THE CONSOLE WILL NOT CONNECT TO WIFI WITHOUT THE POWER ADAPTER BEING USED.

In general, when following the regular maintenance schedule in the user manual a user can expect a 3 to 10 year life before fully replacing the sensor array. A weather station’s life expectancy is greatly impacted by it’s environment see examples below:

1. Coastal, Marsh or Wetland environments. Salt air, salt spray and acidification are the most difficult environments for weather stations to have a long life. The salt air, salt spray and acidification corrode bearings, sensor boards (temperature, humidity, etc.), mounting hardware and other moving parts. Expect a 1-3 year product life span in this type of environment. Ambient Weather's sensors boards are all conformal coated to prevent this corrosion. The nature of digital thermometer and hygrometer sensors relying on electrical resistance of metal changes allows the corrosion to occur more quickly
2. Long term high humidity environments. Prolonged exposure to high levels of humidity, whether salt, acidic or not, predisposes metal parts to fail prematurely. In a hot and dry environment weather stations are known to last 7-10 years.
3. Hurricanes and tropical storms can also reduce the life of a weather station.

Ambient Weather’s weather stations carry a one year warranty.

You can add or delete a device from the Devices panel:

To add a device, tap the + button next to Connect a New Device:

To delete a device, tap on the Ambient Weather icon to open the drop down menu, and select Delete this device.