Frequently Asked Questions

Outdoor Temperature Is Reading High, Low, Or Drifting Out Of Specification.

1. 1. Replace the batteries.
   2. Clean any corrosion around and on the battery terminals.
   3. Reset the array using the steps below
      1. Bring the array inside
      2. Cover solar panel
      3. Remove lithium batteries.
      4. Leave the array sit with the solar panel covered in a dark place until the Red LED on the bottom stops blinking, this can take 24–48 hours to occur.
      5. Install fresh lithium batteries and uncover solar panel
      6. Hold Reset Button for 1 minute
      7. Confirm proper readings and mount unit
   4. If the problem persists, the sensor array must be replaced. We have a one year warranty. To replace under warranty, please visit: https://ambientweather.com/rma.html 
   5. If out of warranty, a replacement array can be purchased here: https://ambientweather.com/amws2902array.html