Frequently Asked Questions

If you are resynchronizing a new sensor array because it needed replacement:

1. Power down your old sensor array. Remove the batteries. Press and hold the reset button (#10 in the figure below) on the bottom of the sensor array for one minute. The array LED (#11) should stop flashing. Continue to press and hold the reset button until the LED stops flashing. This drains the super capacitor.
   
2.  Power up the new sensor array per the instruction manual (insert batteries and remove solar panel sticker cover. The LED will flash about once per 16 seconds. Place about 10 feet from the console.
3. Power down and up the console by disconnecting AC power and batteries.