Ambient Weather Support

Unable To Connect To AmbientWeather.Net Or Awnet App With AT&T UVERSE/ARRIS Modem/Router

Unable to connect to AmbientWeather.net or with the awnet app with AT&T UVERSE/ARRIS modem/router

1.From a browser on the same LAN as your Uverse modem/router, browse to the administrator  address.  By default this is 192.168.1.254.

2.On the Status tab, locate the Restart button for the 2.4 ghz radio, highlighted in pink on the attached image.  Click this button.   You will need to provide the Uverse device’s access code, shown on the bottom of the Uverse modem/router, unless it has been changed by the user.  The radio restart takes 5 to 10 seconds. 

3.When the restart is complete, the Device List tab will show all the nodes connected (wired or WiFi).  If the Ambient Weather controller isn’t shown in the device list, or the WiFi icon on the controller panel is not on solid, then go through the WiFi setup as detailed in the awnet app.

4. Click the corresponding link below and follow the awnet app setup instructions.

Android Device: I Cannot Connect My WS-2902A, WS-2902B, WS-2902C To WiFi, Android.
iOS Device: I Cannot Connect My WS-2902A, WS-2902B, WS-2902C To WiFi, Apple Or IOS.