Ambient Weather Support

Please reset the sensor array:

1. Cover the solar collector to shut of the solar energy source.
2. Cover remove the batteries.
3. Press the reset button for a full minute. There should be no LED flashing
4.  Reinsert the batteries. Install fresh batteries if old.
5. Uncover the solar collector.
6. LED should flash once per 14 seconds.
7. Power down and up the console to resync
8. If the outdoor temperature still reads -40 degF or 140 degF after several minutes, the sensor array must be replaced.
9. To replace  under warranty, please visit: www.AmbientWeather.com/rma.html
10. If out of warranty, a replacement is available here:
    https://www.ambientweather.com/amws2902array.html