Frequently Asked Questions

Q: Can I have a label name for each of my sensors?

A: Yes you can with Firmware version 1.2.6. Please follow the steps below to install the version 1.2.6 firmware

WS-3000-X3, WS-3000-X5, WS-3000-X8:

Download the latest Firmware

Instructions:

• Download the firmware file above.
• Extract the file (Firmware.bin).
• Copy the extracted files to the root directory of a blank Micro SD Card (Less than 32Gb in size, formatted for FAT32) from your computer.
• Power down the WS-3000 Display Console.
• Insert the Micro SD Card into the WS-3000 Display Console Micro SD card slot.
• Power up the console.

Sensor Labeling

You can label the location of each of your sensors from the pre-programmed menu.

To add a label, Press the Mode Key  to the Channel Reference Screen. Highlight ‘Setup’ for the Channel you wish to add a label to. Press the  Selection key to access the Channel Reference screen. Use the   Scroll keys to highlight the label you wish to use. Press the  Selection key to save the selected Channel Reference. Press the Mode key till you return to the Home screen to view the newly added label.