Frequently Asked Questions

If the WS-3000 console just flashes or keeps trying to boot up then a firmware update should correct this. Please refer to the steps below to download and install the firmware for your console.

Firmware Updates:

Important Note: The WS-3000-X3 and WS-3000-X5 includes a graph on the display. The WS-3000-X8 removes the graph so all 8 sensors can be displayed at the same time.

• WS-3000-X3 and WS-3000-X5:
   Version 1.2.2
  
  Instructions:
  • Download the firmware file above.
  • Extract the file (Firmware.bin).
  • Copy the extracted files to the root directory of a blank Micro SD Card (Less than 32Gb in size, formatted for FAT32) from your computer.
  • Power down the WS-3000 Display Console.
  • Insert the Micro SD Card into the WS-3000 Display Console Micro SD card slot.
  • Power up the console.
    
    
• WS-3000-X8:
   Version 1.1.9
  
  Instructions:
  • Download the firmware file Firmware.bin above.
  • Copy the Firmware.bin file to the root directory of a blank Micro SD Card (Less than 32Gb in size, formatted for FAT32) from your computer.
  • Power down the WS-3000 Display Console.
  • Insert the Micro SD Card into the WS-3000 Display Console Micro SD card slot.
  • Power up the console.