Ambient Weather Support

How Do I Access The User Interface Panel, Falcon Series.

  1. Press and hold the WI-FI / SENSOR button for six seconds in normal mode, the console green LED will flash to signify that it has entered WAP (wireless access point) mode, and is ready to enter for WIFI settings.
  2. Use your smart phone, tablet, or computer to connect to the console through WiFi. Note that when the console programming is complete, you will resume your default WiFi connection. Note that you cannot connect two devices at the same time when programming.

    3. Once connected, enter the following IP address into any browser’s address bar:
  3. The Console User Interface Panel will load: