Ambient Weather Support

Upgrading your OBSERVERIP IP Module from WS-1002-ARRAY (WH24, WH24B) to WS-2902-ARRAY (WH65, WH65B)

If you are upgrading your OBSERVER array WS-1002-ARRAY to the OSPREY WS-2902-ARRAY, here are the simple steps to follow after your new array arrives:

1. Download the up to date observer IP firmware here
2. Open IPTools 
   
3. Select your device
   
4. click the upgrade button in the upper right corner of the window.
5. Select Upgrade firmware after selecting the proper file using the Select File button
   
   
6. Power up your new array  by installing new AA batteries. (we recommend Energizer Lithium batteries)
   
   
7. Open IP tools again.
   
   
8. Select your device click open
   
   
   Refer to the table below for your unqiue setup
   

   IP Module	Sensor Array Model #	Indoor Baro/Thermo/Hygrometer Model #	Wireless Transmitter Setting in IPTools for OBSERVERIP
   OBSERVERIP	WS-1002-ARRAY (WH24, WH24B)	WS-1000-BTH	WS-1600-IP
   OBSERVERIP	WS-2902-ARRAY (WH65, WH65B)	WH32B	WS-1550-IP
   OBSERVERIP	WS-1002-ARRAY (WH24, WH24B)	None	WS-1500-IP

    

9. Select the proper Weather Station Model Number based on your unique setup
   
10. Press Apply.