Frequently Asked Questions

How to re-sync and reset the WS-1965 outdoor array.

To sync the array to the console, use the step below:

While in outdoor TH/wind chill/dew point/heat index display mode, press the TEMP+ button for 5 seconds, and the console will re-register the outdoor sensor array.

You can then perform a reset of the outdoor array using the steps below:

1. Bring the array inside.
2. Remove the lithium batteries.
3. Leave the array to sit until the red LED on the bottom stops blinking.
4. Install fresh lithium batteries.
5. Hold the Reset button for 1 minute.
   
6. Confirm proper readings and mount the unit.

Also, please ensure you are performing the regular maintenance as prescribed in the guide at the link below.

https://ambientweather.com/faqs/question/view/id/1447/