Frequently Asked Questions

To Calibrate the Multi CH T& H sensors you will need to access the Web GUI. To access the Web GUI you first press and hold the Temp and Rain buttons together on the console for 5-10 seconds.

The console will then flash the wifi icon by time and date.

Then on your phone, tablet or computer go to settings, and then the wifi networks. Select the consoles access point. It will start with WN1965B-WIFI

It will say connected without wifi or no internet or sometimes it will checkmark. After that you open a web browser and type into the web address bar 192.168.4.1. If it pops up a screen that say login, use Admin for the username, make sure the password is blank, then click the login button.

It will then let you access the Web GUI. On the left click on Calibration.

Once in calibration scroll down and select Multi CH T&H Calibration

On the next screen it will then let you calibrate the Multi CH T&H sensors. 

After entering the calibrations click save. 

Then the console will calibrate to the new entry.