Frequently Asked Questions

Whether the leaf wetness sensor will connect to your indoor console out of the box can depend upon the age of your console.
To determine this, we will first need to access the about screen.

To access this,

tap the Settings button     four times to get to the Factory page.

Select up  to highlight About Display, and select plus .

If your about screen appears as below




Please update your firmware using this file:

To update our firmware, follow the steps below.

Note:  File may download as another file name, rename to Factory.bin.

1. Copy the Factory.bin to your Micro-SD Card (the SD card must be empty and format FAT32).
2. Example of how it should appear after the file is copied.

3. Power down your display console by removing AC power.
4. Insert the SD Card into the display console.
5. Power up the display console.
6. The console will verify the firmware was updated.
7. Power down the console after complete. Remove the SD Card when the console is powered down.

If you About screen appears as the screen below



Please attempt a resync of the sensor using the guide below

How To Re-Register The Indoor And Outdoor Sensors For WS-2000, WS-2002, WS-5000 Consoles

https://ambientweather.com/faqs/question/view/id/1486/