Frequently Asked Questions

The Barometer Never Changes On The Console After Calibration?

If the barometer never changes on the console but does change on AmbientWeather.net. there is a bug in the firmware that causes this.

This is resolved in Version 1.05:

https://www.ambientweather.com/amwefawsdoce.html

A temporary work around is to switch the display to ABS pressure and back to REL pressure.  To switch between ABS and REL pressure:

Press and hold the BARO button for 2 seconds to enter barometric mode, and press the [ ^ ] button to
switch between the relative and absolute pressure reading.

Did you find what you were looking for?