Frequently Asked Questions

To Calibrate the sensors you will need to access the Web GUI. To acccess the Web GUI you first press and hold the Temp and Rain buttons together on the console for 5-10 seconds.

(Place holder image)

The console will then flash the wifi icon by time and date.

(Place holder image)

Then on your phone, tablet or computer go to settings, and then the wifi networks. Select the consoles access point. It will start with WN1866B-WIFI

(Possible Place holder image)

It will say connected without wifi or no internet or sometimes it will checkmark. After that you open a web browser and type into the web address bar 192.168.4.1. If it pops up a screen that say login, use Admin for the username, make sure the password is blank, then click the login button.

It will then let you access the Web GUI. On the left click on Calibration.

It will then pop up the Calibration screen. Here is will let you adjust the sensors. In this example we used Wind Gain. Just click on it and type in the adjustment. Then at the bottom click save

Then the console will calibrate to the new entry.