Ambient Weather WS-10 Wireless Indoor/Outdoor 8-Channel Thermo-Hygrometer with Three Remote Sensors
Simple to read, simple to use, and affordable, the WS-10 includes an indoor thermo-hygrometer inside the console, and three remote thermometer-hygrometer sensors (F007TH), which are all displayed at the same time.
The display console can remotely read and update up to eight remote thermo-hygrometer sensors.
The console includes audible and visual alarms when temperature and humidity exceed your pre-set minimum and maximum alarm settings.
The WS-10 includes three remote thermometer-hygrometers, and five additional sensors can be added (F007TH, F007TP, F007T, F007PF) for comprehensive monitoring.
The console displays temperature and humidity, minimum and maximum temperature and humidity, which can be manually reset.
The scroll mode allows you to view the indoor thermometer-hygrometer and channels 4 trough 8 without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.
Each remote sensor includes dip switches for channel selection and units of measure (degF vs degC).
The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries.
Ambient Weather User Manuals
WS-10 USER MANUAL
(Size: 1023.4 KB)
Product Questions
If the sensor(s) have stopped communicating to your console, it may be as simple as placing the remote(s) (powered up) about 10 feet away from the console, power down and up the console by removing one or more batteries, disconnecting from AC power (if applicable), wait 30 seconds, and put the batteries back in, then wait several minutes to resync.
DO NOT TOUCH ANY BUTTONS and look for the search icon. Wait until the search icon turns off before pressing any buttons.
If you have more than one sensor, make sure they are programmed to transmit on different channels.
If the problem persists, we have a one year warranty. To replace under warranty, please visit: www.AmbientWeather.com/rma.html
... Permalink- Replace the batteries. We recommend the following batteries:
My Rechargeable Batteries No Longer Work. Which Batteries Are Recommended For My Weather Station? - Clean any corrosion around and on the battery terminals.
- If the problem persists, the sensor array must be replaced. We have a one year warranty. To replace under warranty, please visit:www.AmbientWeather.com/rma.html
- If out of warranty, a replacement array can be purchased at AmbientWeather.com
If the sensor displays “OF” and the console displays “LL”or “HH.H”, the senor must be replaced.
We have a one year warranty. For details, please visit: www.AmbientWeather.com/rma.html
Out of warranty replacements are available here:
F007PF: https://www.ambientweather.com/amf007pf.html
F007T: https://www.ambientweather.com/amf007t.html
F007TH: https://www.ambientweather.com/amf007th.html
F007TP: https://www.ambientweather.com/amf007tp.html
... Permalink
Prior to entering the calibration mode, press the CHANNEL/+ button to select the temperature you wish to adjust.
To enter the temperature calibration mode, press and hold the ALARM/ADJUST and CHANNEL/+ buttons at the same time for 5 seconds and the temperature value will begin flashing. Press the CHANNEL/+ button to increase the temperature and the MIN/MAX/- button to decrease the temperature reading in 0.1° increments. To rapidly increase (or decrease) the temperature reading, press and hold the CHANNEL/+ or MINMAX/- button.
To return the temperature to the actual or uncalibrated measurement, press the ADJUST button.
One the displayed temperature equals the calibrated source, press and hold the ADJUST button for three seconds, or wait 15 seconds for timeout, and the temperature value will stop flashing.
Reference the following Help Guide on Temperature Calibration Sources:
How Do I Calibrate Temperature?
Product Manual
https://ambientweather.com/mwdownloads/download/link/id/517/
Product Page
https://www.ambientweather.com/amws10.html
The default temperature units of measure are degrees Fahrenheit. To toggle between degrees Celsius and degrees Fahrenheit, press and hold the MIN/MAX button for 3 seconds while in normal mode.
Product Manual
https://ambientweather.com/mwdownloads/download/link/id/517/
Product Page
https://www.ambientweather.com/amws10.html
If the console does not power up or all of the segments are displayed at once when the batteries are inserted:
- Make sure you are using fresh batteries. If the problem persists:
- The console needs replacing. We have a one year warranty. To replace under warranty, please visit: www.AmbientWeather.com/rma.html
- For out of warranty replacements, please visit https://www.ambientweather.com/amws10c.html
Product Manual
https://ambientweather.com/mwdownloads/download/link/id/517/
Product Page
https://www.ambientweather.com/amws10.html
If one of the sensors does not communicate with the console, try swapping channels with another sensor.
For example, switch Sensor Channel 2 to 3 on one sensor and and 3 to 2 on another sensor. You will have to power down and up the remotes after you change the dip switches.
Product Manual
https://ambientweather.com/mwdownloads/download/link/id/517/
Product Page
https://www.ambientweather.com/amws10.html
The indoor section of the display also displays Channels 4-8.
To manually switch channels, press the Channel button. To scroll, press the Channel button until you see the scroll icon 
in the Indoor section of the display.
Product Manual
https://ambientweather.com/mwdownloads/download/link/id/517/
Product Page
https://www.ambientweather.com/amws10.html
- Make sure that the channel numbers on the sensor match the console. Each sensor should be on a different channel.
- It is possible the calibration values were adjusted. To return the temperature to the measured value, you must enter the temperature calibration mode.
Prior to entering the calibration mode, press the CHANNEL/+ button to select the temperature you wish to adjust.
To enter the temperature calibration mode, press and hold the ALARM/ADJUST and CHANNEL/+ buttons at the same time for 5 seconds and the temperature value will begin flashing.
To return the temperature to the actual or uncalibrated measurement, press the ADJUST button.
Finally, press and hold the ADJUST button for three seconds, or wait 15 seconds for timeout, and the temperature value will stop flashing.
Product Manual
https://ambientweather.com/mwdownloads/download/link/id/517/
Product Page
https://www.ambientweather.com/amws10.html
The calibration settings are not saved when power is removed from the display console.
Thus, if you remove and reinsert the batteries, you will be required to re-enter the calibration settings.
... Permalink
Alarm settings are only supported for channels 1-3. One option is to purchase the WS-50 console (WS-50-C), which supports multiple settings for email and text alerts.
For more information on the WS-50-C, please visit:
https://www.ambientweather.com/amws50c.html
Product Manual
https://ambientweather.com/mwdownloads/download/link/id/517/
Product Page
https://www.ambientweather.com/amws10.html
