Ambient Weather WeatherMount Weather Station Mount

$99.99
Availability: In stock
SKU
WEATHERMOUNT
Please fill out the selections below to help us ensure that you're getting the most accurate product

 FREE US SHIPPING

The WeatherMount Weather Station Mount is a flexible mounting alternative to a mounting pole or tripod. The mounting plate provides a fast and easy installation, and can be mounted on a pitched surface, flat roof or vertical surface, such as a gable.

The WeatherMount is constructed from powder coated steel and includes a galvanized aluminum mast. This mounting system is strong, durable and stable. The slender design is simple, unobtrusive and aesthetically pleasing. The base can be adjusted to mount on any pitched roof. Works with all weather stations (except RainWise, see Monomount), including the new Davis Instruments Vantage Vue.

The small base footprint 4-3/4" W x 7" H (mounting footprint 3.75" W x 6" H) allows four 1-5/8" lag screws (included w/ Tar Pads) to be easily mounted at the apex of your gable. The mount angles 12" in the horizontal direction to allow clearance of eave or roof overhangs.

The total height of the WeatherMount and mast is approximately 50".

We ship this item in two configurations depending on the item(s) on each order.

Configuration:

Includes one j-pipe section and three unassembled 14" x 1.25"-diameter masts. Add a mast extension (see below) to extend the pole an additional 31".

The weather station pictured is not included.

  • WeatherMount and mast height is approximately 50"
  • Mounts to pitched surface, flat roof or vertical surface
  • Small mounting plate footprint (3.75" x 6") allows for easy installation in difficult locations
  • 2 x 5" x 1.5" Tar Pads
  • Strong, durable and stable rust proof powder coated steel construction
  • Add additional masts to extend the height 31" per mast

Features:

  • WeatherMount and mast height is approximately 50"
  • Mounts to pitched surface, flat roof or vertical surface
  • Small mounting plate footprint (3.75" x 6") allows for easy installation in difficult locations
  • 2 x 5" x 1.5" Tar Pads
  • Strong, durable and stable rust proof powder coated steel construction
  • Add additional masts to extend the height 31" per mast

Product Support Questions

The bolt and nut head size is 7/16″.  Use 7/16″ wrench or ratchet.

... Permalink

If you are having trouble inserting your Weathermount/Mounting poles into one another you may need to remove some metal burrs/ shavings. You will need a metal file, as shown in the video, to remove any burrs from both the inside and outside of the pole opening.

... Permalink
Other Items you Might Consider