Ambient Weather WS-2902D-WH31E Wireless Console for WS-2902, WS-2902A, WS-2902B Wireless Weather Station

1. Look for the WiFi icon  in the time field of the weather station console. Make sure this WiFi icon is on. If it is on, you already connected to WiFi.
2. The WS-2902A will not connect to a Guest Account.
3. If you have repeaters and they have the same name or SSID,  power off the repeater(s).
4. If you own a Mesh Network (examples,  Orbi, eero or Google), temporarily turn off all of the secondary nodes, leaving only the primary node (the node connected to the Internet) powered up.If you use a Virtual Private Network (VPN), temporarily turn this off.
5. Select your APP PERMISSIONS on your Android Device and make sure Location is turned On for the awnet app:
   
6. Temporarily turn off virus software, like Bitdefender, which is known to cause connection issues.
7. The Android phone may not connect to the Ambient Wireless SSID if it cannot resolve the DNS address client3.google.com, and will instead try to use the LTE network.To avoid this,  temporarily disable Switch to mobile data on your  on your device under Settings -> Connections -> WiFi -> Advanced -> Switch to mobile data. You can re-enable this after you are finished.or:
8. Swipe down from the top of the screen, select Settings, press Data usage and then flick the Mobile data switch from On to Off – this will completely turn off your mobile data connection.  You can re-enable this after you are finished.
9. To connect your console to your wireless router and the Internet, you must first download the awnet app  to your phone or tablet. The awnet app is only a console configuration tool and is not used to view your live data.The app is available here:
   Google Play: https://play.google.com/store/apps/details?id=com.dtston.ambienttoolplus
   
   Note: The most common mistake is to download the AmbientTool app, which is designed for the first generation WS-2902.
10. Press and hold the WIND + and PRESSURE – buttons at the same time for four seconds. (2) The WiFi icon will begin flashing rapidly and the characters M-B will flash, indicating the console is broadcasting a WiFi signal.
11. Run the Ambient Weather awnet  app , and select Add a Device:
12. Proceed through the awnet wizard following the instructions at the bottom. On the fourth panel, select Scan enter your 2.4 GHz router’s name (SSID) and WiFi password:
    
    Important Note: If you own a dual band router, and the SSIDs (router name) are different for the two different bands, make sure you select the 2.4 GHz Band.
13. Scroll to the bottom and select ‘Save’
14. If the problem persists, rerun this help guide, but this time, connect the phone to the console WiFi AMBWeather-WIFI first, before proceeding to Step 5:
    
15.  If you continue to have an issue, try a different android or apple device.  The most common issue is typing it in wrong if you own and Apple, or not selecting it when you Scan Devices on and Android.

WiFi Connection Video, Android: WiFi Connection Video, Android

**NOTE** MAKE SURE YOU ARE USING THE AC POWER ADAPTER THAT CAME WITH YOUR CONSOLE. THE CONSOLE WILL NOT CONNECT TO WIFI WITHOUT THE POWER ADAPTER BEING USED.

1. Make sure your weather station console is connected to WiFi. Look for the WiFi icon  in the time field on your display console.
2. Launch awnet  on your mobile device or tablet, the weather station MAC address is displayed in the Device List.
   The example below is for three devices connected to the same network:

Tap on the device directly to program it and make sure a schedule it set:

1. Look for the WiFi icon  in the time field of the weather station console. Make sure this WiFi icon is on. If it is on, you already connected to WiFi.
2. The WS-2902A will not connect to a Guest Account.
3. If you have repeaters and they have the same name or SSID,  power off the repeater(s).
4. If you own a Mesh Network (examples,  Orbi, eero or Google), temporarily turn off all of the secondary nodes, leaving only the primary node (the node connected to the Internet) powered up.If you use a Virtual Private Network (VPN), temporarily turn this off.
5. WiFi Assist is a feature lets you automatically pop over to cellular data if you end up on a WiFi network with a poor connection. This can interfere with the connection process it is recommended to be disabled during setup.
6. Go to Settings → Cellular
   
7. Scroll all the way to the bottom of the cellular data settings and turn off WiFi assist. it will be the last option beneath everything else.
   
8. Scroll all the way back up to the top and now disable cellular data completely.
   
9. To connect your console to your wireless router and the Internet, you must first download the awnet app  to your phone or tablet. The awnet app is only a console configuration tool and is not used to view your live data.The app is available here:Apple iOS: https://itunes.apple.com/us/app/awnet/id1341994564
   
   Note: The most common mistake is to download the AmbientTool app, which is designed for the first generation WS-2902.
10. When you first open up the awnet app please make  sure you select ‘Allow While Using App‘. If you DO NOT select ‘Allow While Using App‘ then your iphone will not connect and you will need to uninstall then reinstall the awnet app
11. Press and hold the WIND + and PRESSURE – buttons at the same time for four seconds. (2) The WiFi icon will begin flashing rapidly and the characters M-B will flash, indicating the console is broadcasting a WiFi signal.
12. Prior to running the awnet app, make sure your phone is connected to your router. If you own a dual band router, and the SSIDs (router name) are different for the two different bands, make sure you select the 2.4 GHz Band.
13. Run the Ambient Weather awnet  app , and select Add a Device:
    
14. Proceed through the awnet wizard following the instructions at the bottom. On the fourth panel, select enter the WiFi password. Make sure the correct SSID or router is already entered:
    
15. If you continue to have an issue, try a different android or apple device.  The most common issue is typing it in wrong if you own and Apple, or not selecting it when you Scan Devices on and Android.

**NOTE** MAKE SURE YOU ARE USING THE AC POWER ADAPTER THAT CAME WITH YOUR CONSOLE. THE CONSOLE WILL NOT CONNECT TO WIFI WITHOUT THE POWER ADAPTER BEING USED.

This help guide is intended to be used with WS-2902A, WS-2902B or WS-2902C  model of weather station

If you have a WS-2902 please go the guide here

To update the firmware on the WS-2902A, WS-2902B, WS-2902C  console , launch awnet   from your mobile device.

From the Device Info panel, tap on your device (in the example below, three devices are connected to the same device):

On the bottom right is the current firmware version of your console. If there is an upgrade available, tap on the upgrade link:

WS-2902A, WS-2902B, WS-2902C: Please refer to the manual first for setup instructions.

ANDROID Setup:

 WiFi Connection Video, Android: WiFi Connection Video, Android

 AWNET app Download Android: https://play.google.com/store/apps/details?id=com.dtston.ambienttoolplus

If you are having trouble connecting, after following the set-up instructions in the manual, then please refer to the walk through below:

1. Look for the WiFi icon  in the time field of the weather station console. Make sure this WiFi icon is on. If it is on, you already connected to WiFi.
2. The WS-2902A will not connect to a Guest Account.
3. If you have repeaters and they have the same name or SSID,  power off the repeater(s).
4. If you own a Mesh Network (examples,  Orbi, eero or Google), temporarily turn off all of the secondary nodes, leaving only the primary node (the node connected to the Internet) powered up.If you use a Virtual Private Network (VPN), temporarily turn this off.
5. Select your APP PERMISSIONS on your Android Device and make sure Location is turned On for the awnet app:
   
6. The Android phone may not connect to the Ambient Wireless SSID if it cannot resolve the DNS address client3.google.com, and will instead try to use the LTE network.To avoid this,  temporarily disable Switch to mobile data on your  on your device under Settings -> Connections -> WiFi -> Advanced -> Switch to mobile data. You can re-enable this after you are finished.or:
7. Swipe down from the top of the screen, select Settings, press Data usage and then flick the Mobile data switch from On to Off – this will completely turn off your mobile data connection.  You can re-enable this after you are finished.
8. To connect your console to your wireless router and the Internet, you must first download the awnet app  to your phone or tablet. The awnet app is only a console configuration tool and is not used to view your live data.The app is available here:
   Google Play: https://play.google.com/store/apps/details?id=com.dtston.ambienttoolplus
   
   Note: The most common mistake is to download the AmbientTool app, which is designed for the first generation WS-2902.
9. Press and hold the WIND + and PRESSURE – buttons at the same time for four seconds. (2) The WiFi icon will begin flashing rapidly and the characters M-B will flash, indicating the console is broadcasting a WiFi signal.
10. Run the Ambient Weather awnet  app , and select Add a Device:
    
11. Proceed through the awnet wizard following the instructions at the bottom. On the fourth panel, select Scan enter your 2.4 GHz router’s name (SSID) and WiFi password:
    
    
    Important Note: If you own a dual band router, and the SSIDs (router name) are different for the two different bands, make sure you select the 2.4 GHz Band.
12. If the problem persists, rerun this help guide, but this time, connect the phone to the console WiFi AMBWeather-WIFI first, before proceeding to Step 5:
    
13.  If you continue to have an issue, try a different android or apple device.  The most common issue is typing it in wrong if you own and Apple, or not selecting it when you Scan Devices on and Android.

iPHONE Setup:

 WiFi Connection Video, ios: WiFi Connection Video, Iphone/Ipad

 AWNET app Download ios: https://itunes.apple.com/us/app/awnet/id1341994564

If you are having trouble connecting, after following the set-up instructions in the manual, then please refer to the walk through below:

1. Look for the WiFi icon  in the time field of the weather station console. Make sure this WiFi icon is on. If it is on, you already connected to WiFi.
2. The WS-2902A will not connect to a Guest Account.
3. If you have repeaters and they have the same name or SSID,  power off the repeater(s).
4. If you own a Mesh Network (examples,  Orbi, eero or Google), temporarily turn off all of the secondary nodes, leaving only the primary node (the node connected to the Internet) powered up.If you use a Virtual Private Network (VPN), temporarily turn this off.
5. WiFi Assist is a feature lets you automatically pop over to cellular data if you end up on a WiFi network with a poor connection. This can interfere with the connection process it is recommended to be disabled during setup.
6. Go to Settings → Cellular

7. Scroll all the way to the bottom of the cellular data settings and turn off WiFi assist. it will be the last option beneath everything else.

8. Scroll all the way back up to the top and now disable cellular data completely.

9. To connect your console to your wireless router and the Internet, you must first download the awnet app  to your phone or tablet. The awnet app is only a console configuration tool and is not used to view your live data.The app is available here:Apple iOS: https://itunes.apple.com/us/app/awnet/id1341994564
   
   Note: The most common mistake is to download the AmbientTool app, which is designed for the first generation WS-2902.
10. Press and hold the WIND + and PRESSURE – buttons at the same time for four seconds. (2) The WiFi icon will begin flashing rapidly and the characters M-B will flash, indicating the console is broadcasting a WiFi signal.
11. Prior to running the awnet app, make sure your phone is connected to your router. If you own a dual band router, and the SSIDs (router name) are different for the two different bands, make sure you select the 2.4 GHz Band.
12. Run the Ambient Weather awnet  app , and select Add a Device:
    
13. Proceed through the awnet wizard following the instructions at the bottom. On the fourth panel, select enter the WiFi password. Make sure the correct SSID or router is already entered:
    
14. If you continue to have an issue, try a different android or apple device.  The most common issue is typing it in wrong if you own and Apple, or not selecting it when you Scan Devices on and Android.

If all else fails please refer to this help file to reset your network then go through the setup again: Perform A Network Reset

Pressing WIND + and PRESSURE – at the same time for 5 seconds does not do anything. The buttons work when pressed individually.

1. Make sure the console is plugged into wall power. If it is not plugged in, the console will not connect to WiFi or the Internet.
2. Make sure you own a WS-2902A and not a WS-2902 or WS-1900. This command does not work on previous versions.
3. If you own a WS-2902A, turn the lights off in the room and turn the console around. Make sure the AC adapter is plugged in.
   If you do not see a blue light, the console WiFi chip is no longer working properly and the console needs replacing.
4. If the blue light is present, try performing a factory reset on the console:

How Do I Restore Console To Factory Default Or Factory Reset, Osprey Series?

If the problem persists. the issue is likely a problem with the AC adapter, and in some instances, the console itself.

To test the AC adapter, remove the batteries and plug the console in. If the console does not power up, the AC adapter is faulty. If it does power up, make sure you are not using a third party AC adapter (for example, a power adapter from outside the USA).

To replace the console and AC adapter under warranty, please visit: www.AmbientWeather.com/rma.html

For out of warranty replacements, please visit: https://www.ambientweather.com/amws2902aconsole.html