Ambient Weather WS-2902-RAIN-ASSEMBLY Replacement Rain Gauge Assembly, WS-1900, WS-2000, WS-2902, WS-2902A
$30.99
In stock
SKU
WS-2902-THERMOHYGRO
Replacement Rain Gauge Assembly, WS-1900, WS-2902, WS-2902A.
Includes rain cup mechanism, control PC board, and ribbon cable for easy replacement to your weather station.
Note: The WS-2902-RAIN-ASSEMBLY includes a new Thermo-Hygrometer sensor and Solar Radiation Shield due to the complex process of removing and replacing only the thermo-hygrometer assembly.
Ambient Weather User Manuals
WS-2902C USER MANUAL
(Size: 3.9 MB)
Product Questions
Rain gain is a factor used to calibrate rain gauges, ensuring they accurately measure rainfall. It's a multiplier applied to the raw readings of a rain gauge to account for potential inaccuracies or variations in the gauge's sensitivity.
The Formula for rain gain is :
GAIN = (Expected Output) ÷ (measured Output)
OR
GAIN = (The verified reading of a trusted source) ÷ (Your rain gauge's reading)
- Once you have calculated your gain, you can enter that into the Rain Gain field on the CALIBRATION page of your WS-2000, 4000, or 5000 console. You can access the CALIBRATION page by pressing the
settings icon three times. - Next, use the
or 
to navigate to the Rain Gain option. - Pressing the
will open the Rain Gain screen. Pressing the once will highlight the Rain Gain window. - While the window is YELLOW, the digit you are altering will be highlighted in RED. You can use the or
to increase or decrease the digit. You can then use the 
or 
to change which digit you are altering. - Once you have entered the appropriate GAIN, you can exit this screen by pressing
twice to take you back to the home screen of the console.
Related Products
Check items to add to the cart or
