Ambient Weather WS-2902-ARRAY Replacement Sensor Array, Compatible With All WS-2902, WS-1900, WS-1965, WS-2000 Wireless Weather Stations
Ambient Weather WS-2902-ARRAY Replacement Sensor Array, WS-2902 Wireless Weather Station
Printed on the part as WH65B.
Weather Features
Humidity
Rainfall
Relative Pressure
Solar Radiation
Temperature
UV
Wind Direction
Wind Speed
Ambient Weather User Manuals
WS-2902C USER MANUAL
(Size: 3.9 MB)
Product Questions
To view the Sensors ID panel on the display console, select the 
button to open the Set Up page.
Then using the 
or 
buttons, highlight the More | Setup option towards the bottom right corner of the screen. You can then use the 
button to select this option.
From this page you can use the or buttons to highlight the Sensors ID | Setup option towards the top right corner of the screen. You can then use the button to select this option.
When replacing an old outdoor array with a new unit, it may need to be reconnected to the existing console. This can be accomplished in a few ways, depending on the model of weather station.
WS-2902/WS-1900
Press and hold the LIGHT /SNOOZE button for 5 seconds, and the console will re-register the wireless sensor.
WS-1965
While on the home screen of the display, press TEMP+ button for 5 seconds, and the console will re-register the outdoor sensor array.
WS-2000/WS-4000/WS-5000
Enter the SETUP page by selecting the gear icon button on the far right of the console.
Using the UP or DOWN arrows, navigate to the MORE "SETUP" option towards the bottom right of the screen. Use the PLUS magnifier button on the far left to select this option.
Using the UP or DOWN arrows, navigate to the SENSORS ID "SETUP" option towards the top right of the screen. Use the PLUS magnifier button to select this option.
Using the UP or DOWN arrows, navigate to the SENSORS ID box next to the sensor you wish to connect. (There is full list of Sensor ID abbreviations HERE)
Use the PLUS magnifier button to select this option. This will open a yellow pop-up on the screen.
Use the down arrow to select the REGISTER option. Use the PLUS magnifier button to have the console search for an available sensor. (If you know your devices hexidecimal code, you may enter it here as well)
Using the BACK arrow on the far right of the console will take you back to the home screen.
... Permalink
