Ambient Weather WS-5000-RAIN Replacement Rain Collector for WS-5000, WS-2000 Weather Stations
The extra large rain cup insures better accuracy. Since the sensor is wireless, it can be placed close to the ground, and the removable lid makes it easy for service and maintain.
Printed on the part as WH40E.
Weather Features
Rainfall
Ambient Weather User Manuals
WS-5000-RAIN USER MANUAL
(Size: 2.8 MB)
Product Questions
To view the Sensors ID panel on the display console, select the 
button to open the Set Up page.
Then using the 
or 
buttons, highlight the More | Setup option towards the bottom right corner of the screen. You can then use the 
button to select this option.
From this page you can use the or buttons to highlight the Sensors ID | Setup option towards the top right corner of the screen. You can then use the button to select this option.
The Formula for rain gain is :
GAIN = (Expected Output) ÷ (measured Output)
OR
GAIN = (The verified reading of a trusted source) ÷ (Your rain gauge's reading)
- Once you have calculated your gain, you can enter that into the Rain Gain field on the CALIBRATION page of your WS-2000, 4000, or 5000 console. You can access the CALIBRATION page by pressing the settings icon three times.
- Next, use the or to navigate to the Rain Gain option.
- Pressing the will open the Rain Gain screen. Pressing the once will highlight the Rain Gain window.
- While the window is YELLOW, the digit you are altering will be highlighted in RED. You can use the or
to increase or decrease the digit. You can then use the 
or 
to change which digit you are altering. - Once you have entered the appropriate GAIN, you can exit this screen by pressing
twice to take you back to the home screen of the console.
