Frequently Asked Questions

Your weather station may only display some of the following increments of rain. Please refer to your User Manual for details. Here are how increments of rain are defined:

• Rain Rate is defined as the rainfall in the last 10 minutes, multiplied by 6  (10 minutes x 6 = 1 hour). This is also referred to as instantaneous rain per hour.
• Hourly Rain is defined as the rainfall in the last hour.
• Rain event is defined as continuous rain, and resets to zero if accumulated rainfall is less than 1 mm (0.039 in) in a 24 hour period.  Some weather stations may calculate this slightly differently and the customer should reference the User Manual.
• Daily Rain is defined as the rainfall since midnight (00:00).
• 24 Hour Rain is defined as the rainfall in the last 24 hours. For example, if it is currently 5:00 pm, 24 hour rain would be the amount of rain that has fallen since 5:00 pm yesterday.
• Weekly Rain is defined as the calendar week total, and resets on Sunday morning at midnight (Sunday thru Saturday).
• Monthly Rain is defined as the calendar month total, and resets on the first day of the Month.
• Yearly Rain is defined as the calendar year total, and resets on the first day of the Year. The WS-1000 series weather stations allow you to change the month rain is reset to 0.00 (referred to as Rainfall Season).
• Total Rain is defined as the running total since station was powered up.

Temperature can read too low (or inaccurate) at night when placed close to a radiant heat source, like a house, building or structure.  It can also read lower then other stations in your area due to irrigation or sprinklers.

1. Place the sensor inside next to the indoor console sensor. Wait about 1 hour for stabilization. The sensors should agree within the accuracy specifications. Most RTD (resistive thermal device) sensors are accurate within +/- 2 degF. Thus, the sensors should agree within 4 degF.
2. Mercury or red spirit thermometers are very accurate. Inside your house, place a red spirit thermometer next to the digital thermometer. The thermometers should agree within 2 degF.
3. For colder temperature verification, place the sensor with the red spirit thermometer in the regrigerator or freezer.
4. If the sensor is separate, place the sensor in a shaded area on the north side of the structure to avoid direct and radiant heat.
5. Temperature sensors that do not have radiation shields will absorb solar energy and read higher than the ambient temperature. To prevent this problem, purchase a solar radiation shield from Ambient Weather.
6. We have a one year warranty and a 30 day return policy. For details, please visit: www.AmbientWeather.com/rma.html
7. While at the website, enter the part number of the transmitter in the Search by Keyword to locate the product.

None of the Ambient Weather Stations support repeaters or boosters at this point in time.

1. If the display is on rain rate, and it has not updated in the last 10 minutes, the rain will read 0.00 in. Change the display to read daily, weekly, monthly or yearly rain by pressing the rain key. Does the rain stay at 0.00?
2. Check the funnel for any debris. Clean the funnel.
3. Remove the funnel and check for any debris that may be affecting the tipping mechanism. Tip the mechanism back and forth. Does the rain update on the console? Check for any bugs or dirt. Clean with a damp, soft cloth.
   
4. If the problem persists, we have a one year warranty. Please visit www.AmbientWeather.com/rma.html
5. If out of warranty, our apologies, this product was discontinued and replacement rain gauges are no longer available.

If the sensor array is no longer communicating with the console:

1. Replace the batteries in the thermo-hygrometer sensor. We recommend Energizer Lithium Ultimate:

   Why Are Lithium Ultimate Batteries Recommended And Not Alkaline Or Rechargeable Batteries?

2. The sensor array should be flashing about once per minute.  If the sensor is not flashing, the sensor is no longer working.
3.  If the sensor is flashing, power down and up the console with the remote sensor about 10 feet away. DO NOT TOUCH ANY BUTTONS. The search icon should be displayed on the console.
4. If the problem persists, the sensor is no longer working. Unfortunately, this model has been discontinued.

Product Manual
https://ambientweather.com/mwdownloads/download/link/id/521/

1. While in the Normal mode, press the SET key to enter the Quick Set Mode. Press the SET key again two more times to display the Rain Increments of Measure.  Press the + button to change the increments of measure to total rain (the rain can only be reset if total rain is showing on the display).
2. Press SET again to select Total Rain Reset. Press and hold the SET key for three seconds.

The steps are summarized below from the User Manual: