Frequently Asked Questions

To check and update the firmware, you will need to access the Web GUI. To access the Web GUI, you first press and hold the Temp and Rain buttons together on the console for 5–10 seconds.

The console will then flash the Wi-Fi icon by time and date.

Then on your phone, tablet or computer go to settings, and then the Wi-Fi networks. Select the console's access point. It will start with WN1965B-WIFI

It will say connected without Wi-Fi or no internet, or sometimes it will checkmark. After that, you open a web browser and type into the web address bar 192.168.4.1. If it pops up a screen that say login, use Admin for the username, make sure the password is blank, then click the login button.

It will then let you access the Web GUI. On the left, click on Device settings

On this screen, you can now select to manually check for a firmware upgrade or can allow the station to
automatically upgrade the firmware when a new one is released